 |
Pictures may contain items which are an option and are for illustration purposes only.
|
Click Images to Enlarge
|
|
Our Load Sharing Suspension Showing wheel travel, therefore the most comfortable ride.
|
 |
|
- Aluminum edging along edge of bench inside float
- Antiscramble bars on sides, adjustable to 3 positions to hold and support any sized horse/pony
- Brakesafe unit, self charging, test lights on unit, mounted inside float
- Centre divider padded
- Chassis RHS galvanized, with cross members running left to right
- Chequerplate steps and front and rear of guards
- Chest bars Drop down, adjustable, padded
- Dividers are powdercoated in antique silver hammer tone
- Door stops on all doors
- Drawbar filled in with chequerplate, supported underneath
- Electric brakes on 4 wheels, 10’ with quality Japanese bearings
- Electrical wiring is run in tubes along the chassis, soldered joins, and shrink wrapped to seal
- External width 2.5 mtrs, 2 mtrs inside
- Flooring, hardwood planks 150mm x 30mm, Treated with moisture release gap between boards
- Fully welded zinc sheeting panels
- Gas rams on tailboard x 2
- Handbrake
- Head divider Huge swing away design
- Jockey wheel, swing up heavy pneumatic looking but solid rubber
- Kickboards are 400mm high, with full height an option
- L.E.D tail-lights, clearance, and number plate lights
- Length of internal float 3800mm long or 12’6”
- Light 12v interior above front window
- Mud flaps custom designed
- Painted in Powdercoat, sealed prior to painting, baked at 280’ in oven, painted underneath
- Personal doors x 2 into horses, lockable, handles to open on the inside
- Roof height 2210mm or 7’3”
|
- Roof vents x 2 pop up
- Rubber on floor full length, sheet, non slip, screwed down with galvanized screws
- Rump bars Adjustable, solid steel, with Writco’s own quick release/close catch
- Rust proofed inside chassis, under all added components ie, padding, stainless strike plates, washes and nuts, stoneguard etc
- Side bars padded
- Spare wheel mounted on the right, not mounted on paneling
- Stoneguard x 600mm high on front aluminum with an upgrade to heavier chequerplate an option
- Storm doors on rear, choice of barn or gas lift
- Suspension 3 ton rocker/roller load sharing
- Tackroom x 2 front doors with lockable doors, open inside, slam close
- Tail-board catches are self tightening for no rattle
- Tail-board feet to keep the tailboard out of the mud
- Tail-board fully hot dipped Galvanized
- Tail-board treads under hand laid non slip rubber
- Tie ups x 4
- Towhitch 3500kg
- Towhitch safety chain is the only legal 4177 tow chain x 2 chains
- Tyres are 195 x 14 light truck tyres x 5
- Wheels are white mags with a rating of 950 kg per wheel
- White colourbond cover on outside of tailboard
- Window front large lexan Perspex, tinted
- Windows 1050mm front sliding with screens, tinted safety glass, locking
|
